• Welding to Certification - Monday and/or Wednesday nights

• L.A. City Prep. - Monday nights.

Comprehensive class that will cover “Part 1 - Department Examination” aka the “written” portion of the L.A. City exam. Mainly covering the usage of the AWS D1.1 Structural code book.

“Part 1 - Department Examination” aka the “written” portion of the L.A. City exam. Mainly covering the usage of the AWS D1.1 Structural code book.

-View the documents below for more information.

LADBS - Application Instructions

LADBS - Trade Application

LADBS - Information for Certified Welders

• AutoCAD Open Lab - Monday and/or Wednesday nights.

The large computer lab will be opened for students to use/practice, with an instructor, on the full suite of Autodesk programs.

• TAB Lab Open Lab - Wednesday nights, begins June 11th

The TAB lab will be open for students to use/practice, with an instructor.

Instructor: David S. Schnabl

This course will teach students how to identify A2L refrigerant types and their environmental impact, understand flammability risks and how to mitigate them; how to follow proper installation, recovery, and charging procedures, and how to apply current industry codes and standards to real-world scenarios

Instructor: Adele M. Collins

Instructor: Henry Scott Castro

In this two-night class, you’ll learn proper techniques for measuring, fabricating, and installing coping caps, various gutter styles, and downspouts. The course emphasizes material selection, secure attachment methods, water flow management, and best practices to ensure durability and performance in diverse weather conditions.

Instructor: Henry Scott Castro

This is a three-night class that will introduce as well as provide detailed instruction on proper installation of the various types of architectural expansion joints.

Instructor: David R. Rizzo

In this three-night class, you’ll learn to measure, layout, cut, and assemble mitered joints for coping, fascia, gutters, flashings, reglets, and other architectural components. Emphasis will be placed on achieving clean, accurate angles, proper seam alignment, and watertight finishes. Hands-on practice and demonstrations will ensure students develop the craftsmanship necessary for high-quality installations.

Instructor: Henry Scott Castro

In this two-night course you’ll learn the fundamentals of soldering, including proper material preparation, joint design, and temperature control. Emphasis will be placed on achieving clean, strong, and watertight seams for both functional and aesthetic purposes. Hands-on practice will ensure students gain the skills needed for high-quality professional soldering in architectural projects.

Instructor: David R. Rizzo

In this six-night class, you’ll focus on the design, fabrication, and installation of architectural wall panel systems used in modern building envelopes. Students will learn about various panel types, including composite panels, rain screens, and custom metal panels, and their role in aesthetics, weatherproofing, and thermal performance. The course emphasizes material selection, layout, fastening methods, and integration with building systems. Hands-on workshops will provide practical experience in fabricating and installing wall panel systems with precision and durability.

Instructor: Henry Scott Castro

This is a two-night class that introduces the principles, materials, and the different methods of architectural waterproofing used to protect buildings from water intrusion. Reviewing underlayment, sealants, and installation tips to avoid callbacks.

Instructor: Christopher L. Poompan

This 6 night class concentrates on basic computer knowledge including Window O/S, MS Word, Excel and Bluebeam. This course will also cover basic file structure and file management. This class is required to complete the CAD and Revit Detailing Program. You will only be allowed 1 absence to qualify as a completed class to use as a pre-requisite.

Instructor: Trinidad Melendrez

The purpose of this course is to teach you to read, use and interpret Plans and Specifications associated with the Sheet Metal Industry. This class is required to complete the CAD and Revit Detailing Program. You will only be allowed 3 absences to qualify as a completed class to use as a pre-requisite.

Instructor: Trinidad Melendrez

This class uses ITI Detailing curriculum to teach Board and Field Detailing, including coordination and cut sheets. This class is required to complete the CAD and Revit Detailing Program. You will only be allowed 3 absences to qualify as a completed class to use as a pre-requisite.

Instructor: Jacob J. Gonzalez

Pre-requisites: Blueprint Reading, Board Detailing, Basic Computers, Basic AutoCAD, and CAD Fab + Database, Revit 1, and Revit 2

Final detailing class, students will learn the complete workflow of a sheet metal detailer, including reviewing project documents such as plans, specifications, and submittals to understand project requirements. The course covers model setup and development in Revit using industry best practices, as well as clash detection in Navisworks to identify and resolve conflicts. Students will also use Bluebeam for project coordination, including creating snapshots to support communication and documentation. By the end of the course, students will be able to produce key deliverables such as shop drawings and reports using Revit, Navisworks, and Bluebeam. You will only be allowed 3 absences to qualify as a completed class.

• To receive a trial of the Autodesk software, please read the pdf file below and follow the instructions given.

iTi - Autodesk Learn at Home Licenses

Instructor: Matthew L. Lang

Pre-requisites: Blueprint Reading, Board Detailing and Basic Computers

This class concentrates on learning the basic operating environment of AutoCAD software. This class is required to complete the CAD Detailing Program. You will only be allowed 3 absences to qualify as a completed class to use as a pre-requisite.

• To receive a trial of the Autodesk software, please read the pdf file below and follow the instructions given.

iTi - Autodesk Learn at Home Licenses

Instructor: Christopher L. Poompan

Pre-requisites: Blueprint Reading, Board Detailing, Basic Computers, Basic AutoCAD

This is a class that teaches the preeminent Detailing software used in the Sheet Metal Industry. This class is required to complete the CAD Detailing Program. You will only be allowed 3 absences to qualify as a completed class to use as a pre-requisite.

• To receive a trial of the Autodesk software, please read the pdf file below and follow the instructions given.

iTi - Autodesk Learn at Home Licenses

Instructor: Jacob Gonzalez

Pre-requisites: Blueprint Reading, Board Detailing, Basic Computers, Basic AutoCAD, and CAD Fab + Database

The REVIT class will introduce detailers to MEP Fabrication parts, and best practices for project setup, linking drawings, views, annotation, documentation, families, import and export Fabrication (.maj) files. Also intro to Hangerworks a Revit plugin for point loads and seismic.

• To receive a trial of the Autodesk software, please read the pdf file below and follow the instructions given.

iTi - Autodesk Learn at Home Licenses

Instructor: Roberto Garcia

Pre-requisites: Blueprint Reading, Board Detailing, Basic Computers, Basic AutoCAD, CAD Fab + Database, and Revit 1

This class will continue with Revit and includes NavisWorks.

• To receive a trial of the Autodesk software, please read the pdf file below and follow the instructions given.

iTi - Autodesk Learn at Home Licenses

Instructor: Laura Harris

Learn to duct pressure test by doing the calculations, pressure testing a duct run, and filling out the reports. This is classroom and hands-on.

Instructor: David J. Rodriguez

Students will learn the fundamentals and hands-on skills required to install DX refrigerant piping systems, including proper layout, sizing, and routing of refrigerant piping systems. The course covers best practices for installing suction and liquid lines, brazing techniques, pressure testing, evacuation, and system charging. Students will also learn how to read plans and specifications to ensure installations meet project requirements and industry standards. By the end of the course, students will be able to safely and correctly install DX piping systems, ensuring efficiency, reliability, and code compliance in HVAC applications.

Instructor: N/A

This is a home study class followed with one night of testing for an EPA Certification. For more information and study materials, click here.

Instructor: Adele M. Collins

Instructor: N/A

(Available Online Through www.sheetmetal-iti.org)

This course will prepare you in the management and maintenance of fire dampers, smoke dampers and combination fire and smoke dampers. At the end of this course, you should be prepared to take the Fire and Smoke Damper Supervisor Certification Exam.

Instructor: N/A

(Available Online Through www.sheetmetal-iti.org)

Instructor: Richard Sioson

Instructor: Robert Vasquez Jr.

This six-night class will concentrate on building the skills necessary to work as a Foreman.

Instructor: Richard E. Di Ioli

Powder-Actuated Operator Certification is now done online. http://academy.hilti.com

Sign up with the link above and create an account. Under "General Applications, Bracing & Formwork" you'll see the courses for Powder-Actuated Fastening Operator Certification. Complete the 30min course to receive your certification.

Instructor: John T. Lundgren

Intro to variable refrigerant flow (VRF) systems. This class includes the layout, installation and maintenance/service for VRF systems. The class will walk through the start-to-finish process of installing and servicing the VRF system. You must be competent in soldering, brazing and basic refrigeration knowledge. This class is not intended for the beginning service technician.

Instructor: John T. Lundgren

Basic Level - will focus on electrical principals. High and low voltage systems and related components will be covered, as well as reading wiring schematics.

Intermediate Level - Will focus on refrigeration principals. The refrigeration cycle, basic thermodynamics and refrigeration components will be covered. This class will also cover gas fired heating and brazing copper refrigerant lines.

Instructor: N/A

(Available Online Through www.sheetmetal-iti.org)

Online Course: Ventilation Verification for Indoor Air Quality

Indoor air quality is the air quality within and around buildings and structures. IAQ is known to affect the health, comfort, and well-being of building occupants. Poor indoor air quality has been linked to sick building syndrome, reduced productivity, and impaired learning in schools.

Instructor: N/A

This is an online course through www.klg-iti.org that requires 10/30 hours of online training to be completed within 6 months from the date when you start the course. You must pass each module with a minimum passing score of 70%. You have three chances to pass the OSHA 30 online test. You will receive a temporary certificate upon completion and an OSHA 30 card will be mailed to you. A payment of $117 is required for this course. Proof of payment and a copy of certificate are required in order to get reimbursed by the JATC. Copies of receipts and certificates can be emailed to Max Lai at MaxL@socalsma.org.

• If you’ve lost your OSHA card. Fill out the form below to purchase a replacement card

OSHA Replacement Card Form

Click here for additional Information

Instructor: Aldo I. Cortez

This eight-night class covers the safety as well as the basics of operation on large hydraulic press brakes that you may encounter in a sheet metal shop.

Instructor: Robert Vasquez Jr.

This course will concentrate on building the skills necessary to work as a Project Manager, including jobsite procedures and communications.

Instructor: Richard E. Di Ioli

This 3-night class covers the OSHA requirement requiring all persons working with cranes to have special training. After passing a test, students receive a rigging/signaling card.

Instructor: Adele M. Collins

Instructor: Richard E. Di Ioli

Instructor: N/A

(Available Online Through www.sheetmetal-iti.org)

This course will teach you how to inspect, test and maintain smoke control systems. At the end of this course, you should be prepared to take the Smoke Control Systems Technician Certification Exam.

Instructor: N/A

(Available Online Through www.nemionline.org)

This course will prepare you in the management and maintenance of smoke control systems. At the end of this course, you should be prepared to take the Smoke Control Systems Supervisor Certification Exam.

Instructor: Edward Orozco & William J. Scrimmager Jr.

The purpose of this class is to familiarize a prospective TAB Technician with common operating procedures. These procedures include coding drawings and TAB document setup, familiarization of TAB related tools, collecting data from equipment, duct leakage testing and basic TAB math formulas, ETC. This class is open to Members interested in TAB and members with a TAB certification that have not worked for a TAB contractor yet. This class will also teach the basic principles of test and balance.

Instructor: Colton MacGregor

This class is for the student who has taken the beginning TAB class and is preparing for the TAB certification test.

Online and In-Person Course

Instructor: David S. Schnabl

(Available Online Through www.sheetmetal-iti.org)

This 5-night class covers the 2019 and the 2022 forms of California’s Building Energy Efficiency Standards and steps required by the standards needed to complete the Level 1 forms. The first 100 members who pass the certification exam will receive $350.

Online

Available Online Through http://www.sheetmetal-iti.org)

This class teaches what is needed to pass the ATT certification exam. Pre-requisite – Current TABB certification.

Instructor: Ryan M. Gomez

This class is divided into classroom lessons and hands on field layout in our on-site lab. This class teaches how to operate Trimble robotic total stations (RTS), and data collectors like the new T-100 and Kenai. Lessons will include uploading Trimble files, setting up RTS machine and connecting data collectors to perform layout. Layout will include duck hangers, deck openings wall openings, and capturing existing field conditions.

Instructor: Albert J. Medina

This basic welding course will give students the knowledge and tools to become competent in welding. Class will begin with basic welding electricity and power sources, which will lead into all welding processes in the weld lab.

CWI: Kevin Tinder & Matthew Guzman

Instructor: Bach T. Ly

Certified welders are always in demand. Many welding jobs require certification. Without certified welders our union will forfeit jobs to other trades or non-union workers.

• The welding classes are open entry. Students will work at their own pace. The classes train you to pass the written and practical test for the Los Angeles City license or AWS Certification. View the documents below for more information.

LADBS - Certified Welder Examination Information

LADBS - Application Instructions

LADBS - Trade Application

LADBS - Information for Certified Welders

• All Los Angeles City certification fees will be paid by the J.A.T.C. upon presentation of the certificate. It is the JATC’s goal to certify every welder and to maintain the edge in training.

Instructor: Aldo I. Cortez

This course is designed for students to learn the fundamental welding techniques used in the fabrication process. Using the GMAW process to apply real-world application of practical welding techniques. Proper fit-up, uniformity, tool proficiency and the utilization of varied projects in a more personalized setting.